Reverend Jetstream 290 Bigsby Electric Guitar, Midnight Black with Reverend Soft Case

The Reverend Jetstream 290 is back, now with a Bigsby! The Reverend 9A5 P90’s deliver a fat, raw tone with enough bite to cut through the mix, covering everything from rock to clean twang. The Bigsby system is factory-modded for high performance, featuring a Soft Touch Spring, roller bridge, and locking tuners. Get that vintage wiggle without vintage problems!

• Body: Korina Solidbody
• Pickups: 9A5 Bridge, 9A5 Neck
• Bridge: Bigsby B50 With Roller Bridge
• Neck: Roasted Maple
• Scale: 25 1/2"
• Neck Profile: Medium Oval
• Fingerboard: Rosewood or Roasted Maple 12" Radius
• Frets: 22 - 0.110"W x 0.050"H
• Truss Rod: Dual Action - Headstock Access
• Tuners: Reverend Pin-Lock
• Nut: 43mm Width - Boneite
• Controls: Volume, Tone, Bass Contour, 3-Way
• Strings: 10-46

Custom Pickups: We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.

Roasted Maple Neck: Roasted Maple is heat treated at over 300° F to remove sugars, moisture, and impurities. This maple is lighter, more stable, and has a beautiful caramel color. The result is an exceptional maple neck that will require less seasonal adjustment, and boasts a rich vintage look!

Korina Body: Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.

Bigsby With Roller Bridge and Soft Touch Spring: Our Bigsby tremolo system feels great and stays in tune all night long! We install a custom Soft Touch spring into all our Bigsbys for easy, smooth action. Our roller bridge works with our Pin-Lock tuners and Boneite nut to create a system that strings glide through every time.

Bass Contour: This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

Pin-Lock Tuners: A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

Initialed Headstock: Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.

Custom Dome Knobs: Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

Thin Finish: The paint on a Reverend is thinner than most production guitars, allowing the body to vibrate more freely, for a more resonant and lively tone. Thick finishes might look a little 'slicker', but at Reverend, tone is a top priority. Our finish is also UV cured, which means it's 100% dry from day one, unlike vintage-style nitrocellulose finishes, which can take years to fully dry.

Boneite Nut: We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

Triple-Tree String Tree: This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.

Dual-Action Truss Rod: Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.

Six-Bolt Neck Plate: Two extra bolts increase mounting pressure of the neck by fifty percent. This makes a stronger neck connection, which improves sustain, tuning stability, and neck alignment.

Custom Jack Plate: Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!

Pure Tone Jack: All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

10% Poly Caps: We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.

Treble Bleed Circuit: All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses.

The Reverend Soft Case protects your instrument securely with durable and weather-resistant materials. The interior has thick padding, a removable neck brace, and extra padding on the bottom. The outside features plenty of storage space for your accessories with two large exterior pockets. The padded backside has a carrying handle and two shoulder straps that can be easily tucked away inside a zippable back pad when not in use.

The bag comes in the Reverend Teardrop shape and features the same black and white design and logo placement as the original hard shell case.

This case can be used with all standard guitar models.

• Weather Resistant & Durable
• Padded interior with extra moveable padding and a strap in neck support
• Hide away backpack straps
• Plenty of accessory storage