RockBoard LED 9V Pedalboard Lighting Strip 80 cm 32 in with Remote

These LED strips were developed specifically for installation under effects pedalboards, adding both atmosphere and practical visibility to your setup. High-quality 3M adhesive backing allows secure mounting on the underside or edges of the board. The strips offer multiple colors, adjustable brightness, and both static and dynamic lighting modes.

The strips connect directly to a standard pedalboard power supply using a 2.1 x 5.5 mm DC barrel connector. Controls for Color, Speed, and Mode are integrated into the connection cable, while RC versions can also be operated using the included remote control. Whether used on stage, in the studio, or in a rehearsal space, these LED strips provide subtle lighting that helps you keep track of your pedalboard in any environment.

• Cut to Length: Can be shortened approximately every 5 cm (3 LEDs)
• LED Type: RGB SMD
• Power Supply: 5–12 VDC, negative center
• Current Draw: Approximately 130 mA
• Connection: 2.1 x 5.5 mm barrel socket
• Light Color: Color changing
• Control Options: Mode (Demo), Speed (On/Off), Color
• Mounting: Self-adhesive 3M backing tape
• Dimensions: Width 10 mm (0.39"), Height 3 mm (0.12")
• Connection Cable Length (including socket): Approx. 25 cm (9.84")
• Included Accessories: 1 alcohol pad, 2 self-adhesive cable tie holders, 3 cable ties

Note: Exercise caution when wrapping strip around corners. While a 90-degree bend around the side of a pedalboard will work, wrapping around a flat board (essentially a 180-degree bend) is NOT recommend and will break connection inside the strip.

Note: Actual brightness and color saturation may vary depending on placement, environment, and usage conditions. Before final installation, a test run is recommended to determine optimal positioning and visual effect.